11/8/2022 0 Comments Juniper router configuration![]() NOTE: Don’t forget to commit new configurations. We can configure a static route to fulfill this. GRE on R2 set interfaces gr-0/0/0 unit 0 family inet address set interfaces gr-0/0/0 unit 0 tunnel source set interfaces gr-0/0/0 unit 0 tunnel destination 103.31.40.2įinally, we need to have a routing protocol to route 10.1.1.0/24 to 192.168.0.0/24. Similarly, we will configure GRE for router R2. If everything OK, we will commit our new configuration. GRE on R1 set interfaces gr-0/0/0 unit 0 family inet address set interfaces gr-0/0/0 unit 0 tunnel source set interfaces gr-0/0/0 unit 0 tunnel destination 97.2.41.2īefore, committing above configuration, verify it using show | compare command. ![]() We will use 172.16.0.0/30 for GRE point-to-point IP. ![]() Let’s verify it using the PING command from R1 router to R2 router. In our LAB, we have OSPF with ISP routers from both R1 and R2, which makes our reachability from R1 to R2. Interfaces configuration on show interfaces ![]() Let’s verify, interfaces configuration for both R1 and R2 routers. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |